Sensitivity analysis for ThermalModel
Posted: Wed Mar 12, 2025 11:04 am
Simple sensitivity analysis added for ThermalModel, based on adjusting each of the fudge factor .correction_coefficient properties of the nodes and connections in the thermal model.
Code: Select all
(Connection) Gap: moving to gap connection : 7.200475 deg C change for Rotor coat average
(Node) Phase winding end-winding : 4.671252 deg C change for Phase winding end-winding maximum
(Node) Phase winding end-winding : 4.463888 deg C change for Phase winding end-winding
(Node) Phase winding end-winding : 3.197329 deg C change for Phase winding overall average
(Node) Phase winding end-winding : 2.388890 deg C change for Phase winding boundary
(Node) Phase winding end-winding : 1.784972 deg C change for Phase winding maximum
(Node) Phase winding end-winding : 1.577607 deg C change for Phase winding average
(Connection) Yoke to Ambient lumped connection : 1.499628 deg C change for Phase winding boundary
(Connection) Yoke to Ambient lumped connection : 1.499628 deg C change for Phase winding end-winding
(Connection) Yoke to Ambient lumped connection : 1.499628 deg C change for Phase winding overall average
(Connection) Yoke to Ambient lumped connection : 1.499628 deg C change for Phase winding average
(Connection) Yoke to Ambient lumped connection : 1.285247 deg C change for Phase winding maximum
(Connection) Yoke to Ambient lumped connection : 1.285247 deg C change for Phase winding end-winding maximum
(Connection) Connection winding to end-winding : 0.811283 deg C change for Phase winding boundary
(Connection) Connection winding to end-winding : 0.811283 deg C change for Phase winding end-winding